Print is too dark, Print is too light, Print is too dark print is too light – Dell 2230d/dn Mono Laser Printer User Manual
Page 118
Print is too dark
Try one or more of the following:
C
HECK
THE
DARKNESS
,
BRIGHTNESS
,
AND
CONTRAST
SETTINGS
The Toner Darkness setting is too dark, the Brightness setting is too dark, or the Contrast setting is too high.
•
From Print Properties, change these settings.
Note: This solution applies to Windows users only.
•
From the Quality menu, change these settings.
T
HE
PAPER
MAY
HAVE
ABSORBED
MOISTURE
DUE
TO
HIGH
HUMIDITY
•
Load paper from a fresh package.
•
Store paper in its original wrapper until you use it.
C
HECK
THE
PAPER
Avoid textured paper with rough finishes.
C
HECK
THE
P
APER
T
YPE
SETTING
Ensure that the Paper Type setting matches the paper loaded in the tray.
T
HE
TONER
CARTRIDGE
MAY
BE
DEFECTIVE
Replace the toner cartridge. For more information, see “Replacing the toner cartridge” on page 89.
Print is too light
Try one or more of the following:
Troubleshooting
118