Dell 2230d/dn Mono Laser Printer - Manual (Page 30)

PostScript menu
Menu item Description
Print PS Error
On
Off
Prints a page containing the PostScript error
Note: Off is the factory default setting.
Font Priority
Resident
Flash/Disk
Establishes the font search order
Notes:
• Resident is the factory default setting.
• A formatted flash memory option card must be installed in the printer and
operating properly for this menu item to be available.
• The flash memory option cannot be Read/Write, Write, or
password-protected.
• Job Buffer Size must not be set to 100%.
PCL Emul menu
Menu item Description
Font Source
Resident
Download
Flash
All
Specifies the set of fonts available
Notes:
• Resident is the factory default setting. It shows the factory default set of
fonts downloaded into RAM.
• Download appears only if downloaded fonts exist. It shows all the fonts
downloaded into RAM.
• Flash appears only if a flash option containing fonts is installed.
• A flash option must be properly formatted and cannot be Read/Write,
Write, or password protected.
• All shows all fonts available to any option.
Font Name
<x>
Lets you view or change the setting from a selection list
Symbol Set
<x>
Lets you view or change the setting from a selection list
PCL Emulation Settings
Point Size
1.00–1008.00
Changes the point size for scalable typographic fonts
Notes:
• 12 is the factory default setting.
• Point Size refers to the height of the characters in the font. One point equals
approximately 1/72 of an inch.
• Point sizes can be increased or decreased in 0.25-point increments.
Understanding the printer menus
30