Installation, Positioning the projector, Adjustable feet – Canon LV-X4 LV-7230 User Manual

Page 15

Advertising
background image

15

sta

at
o

Projection angle can be adjusted up to 11.9 degrees with the
adjustable feet.

Lift the front of the projector and pull upward the feet lock
latches on both sides of the projector.

1

Adjustable Feet

Feet Lock Latches

Release the feet lock latches to lock the adjustable feet and
rotate the adjustable feet to adjust the position and tilt.

2

To retract the adjustable feet, lift the front of the projector
and pull and undo the feet lock latches.
Keystone distortion of the projected image can be adjusted
by menu operation. (p24, 41)

3

100”

150”

190”

300”

190”

122”

95”

62”

40”

A

B

Max. Zoom

Min. Zoom

A : B = 9 : 1

Adjustable Feet

(Inch Diagonal)

Note:

• The brightness in a room has a great influence on picture quality. It is recommended to limit ambient lighting in order to obtain the best image.
• The values shown above are approximate and may vary from the actual size.

This projector is designed to project on a flat projection surface and can be focused from 3.3’(1.0m) - 25.3’(7.7m). Refer to
the figure and the table below for the screen size and the distance between the projector and the screen.

(Center)

Positioning the Projector

Installation

Screen Size

(W x H) mm

4 : 3 aspect ratio

Zoom (min)

40”

Zoom (max)

813 x 610

5.2' (1.6m)

3.3' (1.0m)

100”

2032 x 1524

13.1' (4.0m)

8.2' (2.5m)

150”

3048 x 2286

19.7' (6.0m)

12.5' (3.8m)

190”

3861 x 2896

25.3' (7.7m)

16.1' (4.9m)

300”

6096 x 4572

–––––

25.3' (7.7m)

16,1’ (4,9m)

12.5’ (3.8m)

8,2’ (2,5m)

3.3’ (1.0m)

25.3’ (7,7m)

Advertising