Air circulation, Installing the projector in, Moving the projector – Canon LV-X4 LV-7230 User Manual

Page 6: Installing the projector in proper position, Safety instructions

Advertising
background image

6

Safety Instructions

USE CAUTION IN CARRYING OR
TRANSPORTING THE PROJECTOR

– Do not drop or bump a projector, otherwise damages or

malfunctions may result.

– When carrying a projector, use a suitable carrying case.
– Do not transport a projector by using a courier or transport

service in an unsuitable transport case. This may cause
damage to a projector. To transport a projector through a
courier or transport service, consult your dealer for their
information.

Moving the Projector

When moving the projector, replace the Lens Cover and
retract Adjustable Feet to prevent damage to the lens and
cabinet.
When the projector is not in use for an extended period, put
it into the case (carrying bag) supplied with the projector.

Do not tilt the projector more than 20

degrees from side to side.

Do not point the projector up to

project an image.

Do not point the projector down to

project an image.

Do not put the projector on either

side to project an image.

Install the projector properly. Improper Installation may reduce

the lamp life and cause a fire hazard.

Installing the Projector in Proper Position

Openings in the cabinet are provided for ventilation and to
ensure reliable operation of the product and to protect it from
overheating, and these openings must not be blocked or
covered.

CAUTION

Hot air is exhausted from the exhaust vent. When using or
installing the projector, the following precautions should be
taken.
– Do not put any flammable objects near the vent.
– Keep the exhaust vent at least 3’(1m) away from any

objects.

– Do not touch a peripheral part of the exhaust vent,

especially screws and metallic part. This area will become
hot while the projector is being used.

– Do not put anything on the cabinet. The materials put on

the cabinet will not only get damaged but also cause fire
hazard by heat.

Cooling fans are provided to cool down the projector. This
projector monitors internal temperature and control the
running speed of the cooling fans.

Air Circulation

20˚

20˚

;;

;;;;

;;;;;;

;;;;;;;;

;;;;;;;;;

;;;;;;;;;;;

;;;;;;;;;;;;;

;;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;

;;;;;;;;;;;

;;;;;;;;;

;;;;;;;;;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;;;;

;

;;;;;;;;;;;;;;;;

;;;;;

;;;;;;;;;;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;;;

;;;;;;;;;;;;;;;;

;;;;;;;;;;;;;;

;;;;;;;;;;;;;

;;;;;;;;;;;

;;;;;;;;;

;;;;;;;

;;;;;;

;;;;

;;;

Air Intake Vent

Air Intake Vent

Exhaust Vent
(Hot air exhaust)

CAUTION

Carrying Bag (supplied) is intended for protection from dust
and scratches on the surface of a cabinet, and it is not
designed to protect an appliance from external forces. Do not
transport a projector through a courier or transport services
with this bag, otherwise the projector can be damaged. When
handling a projector, do not drop, bump, subject it to strong
forces or put other things on the cabinet.

Advertising