Canon LV-X4 LV-7230 - Manual (Page 17)

17
sta
at
o
Installation
Connecting to a Computer
S-VIDEO IN
RGB IN-2 /
RGB OUT
COMPUTER
AUDIO IN
AUDIO
R VIDEO IN L
SERVICE PORT
RESET
A AUDIO OUT
RGB IN- 1 /
COMPONENT IN IN
Cables used for connection
• VGA Cable (HDB 15 pin) (Only a cable is supplied.)
• USB Cable
• Audio Cables (Mini Plug: stereo) ✽
( ✽ = Not supplied with this projector.)
External Audio Equipment
VGA cable
USB cable
Audio cable (stereo) ✽
Audio cable ✽
(stereo)
Monitor Output
USB port
Audio Output
RGB IN-1/ COMPONENT IN
(or RGB IN-2/ RGB OUT) USB
COMPUTER
AUDIO IN
AUDIO OUT
(stereo)
Audio Input
This terminal is switchable. Set up the
terminal as either Computer input or
Monitor output. (See Page 43.)
VGA cable
Monitor Input
RGB IN-2/ RGB OUT
Note:
When connecting the cable, the power cords of both the projector and
the external equipment should be disconnected from AC outlet.
✔
Note:
• If you wish to use Page e ed d buttons on the remote control unit, connect USB port
of your computer to the USB socket of the projector. (p9,12 and 44)
• When connecting AUDIO OUT to external audio equipment, the projector's built-in
speaker is disconnected.