Dell Inspiron 500m - Manual (Page 106)

106 Ad di ng an d Rep lac ing Pa rts
w
w
w
.d
e
ll.c
om
|
s
u
p
p
o
rt
.d
e
ll.c
om
Adding Memory
You can increase your computer memory by installing memory modules on the system
board. See "Specifications" on page 116 for information on the memory supported by your
computer. Be sure to add only memory modules that are intended for your computer.
NOTE: Memory modules purchased from Dell are covered under your computer warranty.
CAUTION: Before working inside your Dell™ computer, read the safety
instructions on page 16.
1 Save and close any open files, exit any open programs, and shut down the computer
(see "Turning Off Your Computer" on page 42).
2 If the computer is connected to a docking device (docked), undock it. See the
documentation that came with your docking device for instructions.
3 Remove all installed batteries, and disconnect the AC adapter cable and any external
devices from the computer. Wait 5 seconds before proceeding.
4 Ground yourself by touching a metal connector on the back of the computer, and
continue to do so periodically during this procedure.
NOTICE: While you work, periodically touch unpainted metal on the computer to dissipate
static electricity that might harm internal components.
5 Turn the computer over, remove the screw from the memory module cover, and lift the
cover.
3Y647bk0.book Page 106 Wednesday, April 2, 2003 3:24 PM