Dell Inspiron 500m User Manual
Page 107
Add ing an d Rep lac ing Par ts
107
NOTICE: To prevent damage to the memory module connector, do not use tools to spread the
inner metal tabs that secure the memory module.
6
If you are replacing a memory module, remove the existing module.
NOTICE: Handle memory modules by their edges, and do not touch the components on a
module.
a
Use your fingertips to carefully spread apart the securing clips on each end of the
memory module connector until the module pops up.
b
Remove the module from the connector.
NOTICE: If you need to install memory modules in two connectors, install a memory module in
the connector labeled "SLOT 1" before you install a module in the other connector.
7
Ground yourself and install the new memory module:
a
Align the notch in the module with the slot in the center of the connector.
b
Slide the edge of the module firmly into the connector, and rotate the module
down until you feel a click. If you do not feel the click, remove the module and
reinstall it.
8
Replace the cover and screw.
NOTICE: If the memor y module cov er i s di ffic ult to clos e, r emove the module
an d r ein sta ll it . For cin g t he cove r to close may da mag e you r c ompu ter.
3Y647bk0.book Page 107 Wednesday, April 2, 2003 3:24 PM