Managing a usb memory key, Changing the default settings, Deleting an image file – Dell 1815dn Multifunction Mono Laser Printer User Manual
Page 110
OR
Place a single document face down on the document glass.
For details about loading a document, see
"Loading an Original Document"
.
3.
Press Scroll (
or
) to highlight Scan and press Select (
).
4.
Press Select (
) to access USB key.
5.
Press Scroll (
or
) to highlight Custom Scan and press Select (
).
6.
Press Scroll (
or
) to select the image size you want and press Select (
).
7.
Press Scroll (
or
) to select the file type you want and press Select (
).
If you select BMP, select the scan color and resolution.
If you select TIFF, select the resolution and multi page option.
8.
Scanning is started.
For the document loaded on the document glass, the display asks if you want to load another page. Select Yes to add. Otherwise, select No.
The scanned documents are saved on the USB memory key.
Changing the Default Settings
To change the defaults in the quick scan, follow the steps below.
1.
Press Scroll (
or
) to highlight Scan and press Select (
).
2.
Press Select (
) to access USB key.
3.
Press Scroll (
or
) to highlight Default Change and press Select (
).
4.
Press Select (
) to access Image Size.
5.
Press Scroll (
or
) to highlight the image size, Letter, A4, Legal, Folio, Executive, A5, B5, or A6 and press Select (
).
6.
Press Scroll (
or
) to highlight Version and press Select (
).
7.
Press Scroll (
or
) to highlight the file format, BMP, TIFF, PDF, or JPEG and press Select (
).
8.
If you select JPEG, skip to step 11.
If you select TIFF, or PDF, press Scroll (
or
) to select multi page option and press Select (
).
If you select BMP, press Scroll (
or
) to select the color mode, Color, Gray, or Mono, and press Select (
).
9.
If you select TIFF, PDF, or the Mono color mode for BMP, press Scroll (
or
) to highlight Resolution and press Select (
).
10.
Press Scroll (
or
) to highlight to the resolution, 100 dpi, 200 dpi, or 300 dpi and press Select (
).
11.
Press Cancel (
) to return to Standby mode.
Managing a USB Memory Key
You can delete image files stored in a USB memory key one by one or all at once by formatting the device.
Deleting an Image File
To delete an image file that you scanned and saved on your USB memory key.
1.
Insert the USB memory key into the USB memory port on your printer.
2.
Press Scroll (
or
) to highlight Scan and press Select (
).
3.
Press Select (
) to access USB key.
4.
Press Scroll (
or
) to highlight File Manage and press Select (
).
5.
Press Select (
) when Delete appears.
6.
Press Scroll (
or
) to select the folder or file you want and press Select (
).