Dell 1815dn Multifunction Mono Laser Printer - Manual (Page 14)

l Remove all staples and paper clips before loading documents.
l Make sure any glue, ink or correction fluid on the paper is completely dry before loading documents.
l Do not load documents containing different sizes or weights of paper.
l Do not load booklets, pamphlets, transparencies or documents having other unusual characteristics.
Loading an Original Document
You can use the ADF (Automatic Document Feeder) or the document glass to load an original document. Using the ADF, you can load up to 50 sheets of 75
g/m
2 (20 lb) paper at a time. Using the document glass, you can load one sheet at a time.
To load the document in the ADF:
1. Place the document(s) face up on the ADF with the top edge of the documents in first.
2. Adjust the document width guides to the correct document size. Make sure that the bottom of the document stack matches the paper size marked on
the document input tray.
For detailed guidelines for preparing an original document, see "Preparing a Document" .
To load the document in the document glass:
1. Open the document cover.
NOTE: To scan a document from the document glass, make sure that no document is in the ADF. If any document is detected in the ADF, it has priority
over the document on the document glass.
NOTE: To get the best scan quality, especially for color or gray scale images, use the document glass instead of the ADF.