Dell Precision T5400 (Late 2007) - Manual (Page 212)

212 Adding and Replacing Parts
Controller Card Data Cable Connectors
Hard Drive
NOTICE: It is recommended that you only use SAS cables purchased from Dell.
Cables purchased elsewhere are not guaranteed to work with Dell computers.
Removing a Hard Drive from the Rotatable Carrier (Tower or Desktop Computer)
CAUTION: Before you begin any of the procedures in this section, follow the
safety instructions in the Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from
the electrical outlet before opening the cover.
NOTICE: To prevent static damage to components inside your computer, discharge
static electricity from your body before you touch any of your computer’s electronic
components. You can do so by touching an unpainted metal surface on the
computer.
NOTICE: To avoid damage to the hard drive, do not set it on a hard surface.
Instead, set the drive on a surface, such as a foam pad, that will sufficiently cushion
it.
1 If you are replacing a hard drive that contains data that you want to keep,
back up your files before you begin this procedure.
2 Follow the procedures in "Before You Begin" on page 151.
1 power connector 2 SAS data connector
3 interposer 4 SAS drive
5 SAS connector 6 optional PCI Express SAS controller card
1
2 5
4
6
3