Dell Precision T5400 (Late 2007) User Manual
Page 220
220
Adding and Replacing Parts
7 Disconnect the data cable from the back of the hard drive and from the
connector on the system board.
If it is connected to a card and you will not be reinstalling the drive, route
the data cable to the side.
8 Slide the sliding-plate lever to the right to release the shoulder screw and
slide the drive out of the FlexBay.
9 Set the drive aside in a secure location.
NOTICE:
If metal shields are present in your computer configuration, they must be
installed at all times while your computer is in use or your computer may not
function properly.
1
sliding-plate lever
2
SATA data cable
3
power cable
4
power supply
5
SATA connector on system board 6
optional SATA hard drive in FlexBay
1
sliding-plate lever
2
optional third hard drive in FlexBay
1
2