Lockups and software problems, Lockups and software, Problems – Dell Precision 670 User Manual

Page 155: The computer does not start up, The computer stops responding, A program stops responding, A program crashes repeatedly

Advertising
background image

Solving Problems: Dell Precision Workstation 470 and 670 Computers User's Guide

file:///T|/htdocs/systems/ws670/EN/ug_en/solve.htm[3/20/2013 9:31:58 AM]

Test the keyboard —

Connect a properly working keyboard to the computer, and try using the keyboard. If

the new keyboard works, the original keyboard is faulty.

Run the

Dell Diagnostics

Check for software and hardware incompatibilities

Lockups and Software Problems

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions located in

the Product Information Guide.

The computer does not start up

Check the

Diagnostic Lights

Ensure that the power cable is firmly connected to the computer and to the electrical outlet

The computer stops responding

NOTICE:

You might lose data if you are unable to perform an operating system shutdown.

Turn the computer off —

If you are unable to get a response by pressing a key on your keyboard or

moving your mouse, press and hold the power button for at least 8 to 10 seconds until the computer turns off.

Then restart your computer.

A program stops responding

End the program —

Windows XP, Windows 2000

1. Press <Ctrl><Shift><Esc> simultaneously.

2. Click Applications.

3. Click the program that is no longer responding.

4. Click End Task.

A program crashes repeatedly

NOTE:

Software usually includes installation instructions in its documentation or on a floppy disk or CD.

Check the software documentation —

If necessary, uninstall and then reinstall the program.

Advertising