Dell PowerVault NX1950 - Manual (Page 10)

10 Introduction
• You can configure Initiators with one or two dedicated NICs for iSCSI,
based on your requirement.
NOTE: Table 1-1 and Table 1-2 provide information about the iSCSI Target NIC
configuration. The optimal connection information is also provided as options.
You can configure the iSCSI NICs according to your network requirements.
Table 1-1. Using a Single PowerVault NX1950 Storage Solution as a Target
Number of NICs Details Refer to Figure
4 NIC-1 and NIC-2 - Teamed NICs for public
network
NIC-3 - iSCSI dedicated traffic (subnet A)
NIC-4 - iSCSI dedicated traffic (subnet B)
Figure 1-1
3- Option 1
NOTE: Use this
configuration if iSCSI
traffic has more
priority than NFS
traffic.
NIC-1 - NIC for public Network
NIC-2 - iSCSI dedicated traffic (subnet A)
NIC-3 - iSCSI dedicated traffic (subnet B) Figure 1-2
3- Option 2
NOTE: Use this
configuration if NFS
has more priority than
iSCSI traffic.
NIC-1 and NIC-2 - Teamed NICs for public
network
NIC-3 - iSCSI dedicated traffic
Figure 1-3