Dell PowerVault NX1950 - Manual (Page 26)

26 Quick Install Steps for Initiator-Target Connection
4 To create a target, follow the instructions in "Creating the Target" on
page 19 and to create a virtual disk, follow the instructions in "Creating a
Virtual Disk" on page 20. During step 7 of "Creating the Target" on
page 19, use the Browse option to ensure that the iSCSI Initiator
Identifier screen displays all Initiators that are registered with iSNS server.
NOTE: The 3.0 iSCSI Software Target does not query the iSNS server for
registered iSCSI Initiators during Target creation. You have to enter the IQN
name of the Initiator manually. After you create the Target, the Target IQN is
listed in iSNS server registered device list and can be accessed by
Initiators that were added during Target creation. This issue is resolved in
the 3.1 iSCSI Target.