Minimum system requirements, Cluster nodes, Cluster storage – Dell PowerVault 770N (Deskside NAS Appliance) User Manual

Page 19

Advertising
background image

cluster.

Failover

ring

Running applications migrate

to the next preassigned

cluster node.

Easy to scope server

capacity for one

server failure.

The cluster node next in line for failover may not have

ample resources available to handle the additional

workload of the failed node.

Minimum System Requirements

NAS Fibre Channel cluster configurations require the following hardware and software components:

Cluster nodes

Cluster storage

Cluster interconnects (private network)

Client network connections (public network)

Operating system and storage management software

Cluster Nodes

Table 1-11

lists the hardware requirements for the cluster nodes.

Table 1-11. Cluster Node Requirements

Component Minimum Requirement

Cluster

nodes

Two supported PowerVault NAS systems running Windows Storage Server 2003, Enterprise Edition.

Processors

At least two processors for each cluster node.

NOTE:

Each cluster node must have identical processors.

RAM

At least 512 MB of RAM installed on each cluster node.

NOTE:

Each cluster node must have identical memory configurations.

HBAs

Two Fibre Channel HBAs for each cluster node.

Dell recommends placing your Fibre Channel HBAs on separate PCI buses to improve availability and

performance.

See the Platform Guide for more information about supported NAS systems, specific HBA models supported

by the system, and PCI slot configuration guidelines.

NICs

Minimum of two NICs: one NIC for the public network (client LAN connections) and another NIC for the

private network (cluster interconnect).

You must install identical NICs in each cluster node for the public and private networks.

RAID

controller

The operating system volume is located in a RAID 1 configuration on an internal RAID controller on each NAS

system.

Cluster Storage

Table 1-12

provides a list of supported storage systems and the configuration requirements for the cluster nodes and stand-

alone systems connected to the storage systems.

Table 1-13

provides hardware requirements for the processor enclosures

(DPE and SPE).

Advertising