Dell OptiPlex Gxi - Manual (Page 126)

2 Dell OptiPlex GXi Low-Profile Systems Reference and Installation Guide
connectors (continued)
parallel port, 4-2, 6-1
power input, 6-1
riser board, 5-9, 6-1
serial port, 4-2, 6-1
system board, 5-9, 6-1
USB, 4-2, 6-1
video, 4-2, 6-1
control panel
connector, 6-1
cover
removing and replacing, 5-2
CPU Speed category, 2-6
D
Date category, 2-4
DC power cables, 5-4, 7-2
Dell Inspector utility, 1-3
Desktop Management Interface. See DMI
diagnosing problems, 1-6
diagnostics
system, 1-3
DIMMs
about, 6-4
capacities supported, 1-1
installing, 6-6
removing, 6-6
sample configurations, 6-5
sockets, 6-1
direct current
See DC
Diskette category, 2-9
Diskette Drive A and Diskette Drive B categories, 2-4
diskette drives
connecting, 7-2, 7-3
interface connector, 6-1
turning off built-in controller, 2-9
types, sizes, and capacities, 2-4
Display Power Management Signaling. See DPMS
DMI, 1-3
DPMS and power management, 2-8
Drive A Location category, 2-4
drive bays
about, 7-1
installing drives, 7-3
drivers for integrated devices, 4-1
Drives
Primary and Secondary categories, 2-4
drives
See also diskette drives; EIDE hard-disk drives; SCSI
devices; tape drives
boot diskette drive, 2-4
cables, 7-2
connecting to power, 7-2
formatting, 7-8, 7-12
front-panel inserts, 7-1
installing, 7-3
location in chassis, 7-1
partitioning, 7-8, 7-12
terminators, 7-9
types supported, A-3
verifying drive operation, 7-6
drive-type numbers, 2-4
E
ECC, 1-1
ECC category, 2-10
EDO, 1-1