Dell OptiPlex Gxi - Manual (Page 75)

Installing System Board Options 6-1
Chapter 6
Installing System Board Options
T
his chapter describes how to install the following
options:
• Industry-Standard Architecture (ISA) and Peripheral
Component Interconnect (PCI) expansion cards
• System memory
• Microprocessor
This chapter also includes instructions for replacing the
system battery, if necessary.
Use Figure 6-1 to locate the system board features.
Figure 6-1. System Board Features
video
connector
(MONITOR) parallel/serial port
connectors (stacked)
(PARALLEL/SERIAL)
diskette/tape drive
interface connector
(DSKT) (pin-1
corner) riser board
connector
(RISER)
secondary EIDE interface
connector (IDE2) (pin-1 corner)
system
board
jumpers
microprocessor fan
connector (FAN)
battery socket
(BATTERY)
control panel
connector (PANEL)
3.3-V power input
connector
(POWER2)
keyboard/mouse
connectors (stacked)
(KYBD/MOUSE)
main power input
connector (POWER1)
microprocessor socket
(MICROPROCESSOR)
(pin-1 corner)
DIMM sockets (4)
USB connectors
(USB)
primary EIDE
interface connector
(IDE1) (pin-1 corner)
cache-memory card
connector (CACHE)
line-in jack
(LINE-IN)
line-out jack
(LINE-OUT)
microphone
jack (MIC)
CD-ROM drive
interface connector
(CD_IN)
front of
computer
NIC daughter card
connector