System board labels, System board labels -8, Table 5-1 – Dell OptiPlex Gxi User Manual
Page 72: System-board jumper settings -8, Ystem board labels
5-8
Dell OptiPlex GXi Low-Profile Systems Reference and Installation Guide
S
ystem Board Labels
Table 5-2 lists the connectors and sockets on your system
board and riser board, and it gives a brief description of
their functions.
Table 5-1. System-Board Jumper Settings
Jumper
Setting
Description
100
Reserved (do not use).
133
*
Jumpered when the microprocessor’s internal speed is 133 MHz.
166
*
Jumpered when the microprocessor’s internal speed is 166 MHz.
200
*
Jumpered when the microprocessor’s internal speed is 200 MHz.
PSWD
(default)
Password feature enabled.
Password feature disabled.
BIOS
(default)
Reserved (do not use).
NICRST
(default)
Reserved (do not use).
*
One set of the speed jumper pins must have a jumper plug installed; otherwise, the system will operate at an undetermined speed.
NOTE: For the full name of an abbreviation or acronym used in this table, see the Glossary in the online System User’s Guide.
jumpered
unjumpered