Dell Dimension 2200 - Manual (Page 41)

l Computer data – Two boxes below the title that display the system processor, L2 cache, service tag, and the version number of the system setup
program.
l Options – A scrollable box listing options that define the configuration of your computer (including installed hardware, power conservation, and security
features).
Fields to the right of the listed options contain settings or values. The settings and values that you can change are brighter on the screen. All other
settings and values are set by the computer and cannot be changed. When <Enter> appears to the right of an option, press <Enter> to access a pop-up
menu of additional options.
l Key functions – A line of boxes across the bottom of all system setup screens that lists keys and their functions within the system setup program.
l Help – Press <F1> for information on the option that is selected (highlighted).
The following table shows CPU Information option information.
The following table shows Integrated Devices (Legacy Select Options) information.
Option Function
System Time Displays the system time.
System Date Displays the system date.
Diskette Drive A: Displays floppy drive details.
Primary Drive 0: Displays primary hard drive 0. The default is Auto.
Primary Drive 1: Displays primary hard drive 1 (if installed). The default is Off.
Secondary Drive 0: Displays secondary hard drive 0. The default is Auto.
Secondary Drive 1: Displays secondary hard drive device type. The default is Off.
Boot Sequence Displays boot sequence when <Enter> is pressed.
Memory Information Displays amount of system memory.
CPU Information Displays CPU information when <Enter> is pressed.
Integrated Devices (Legacy Select Options) Displays integrated device options when <Enter> is pressed.
PCI IRQ Assignments Displays PCI IRQ assignments when <Enter> is pressed.
IRQ Reservations Displays the IRQ reservations when <Enter> is pressed.
System Security Displays system security options when <Enter> is pressed.
Keyboard Numlock Turns the Keyboard NumLock option on and off. The default is On.
Report Keyboard Errors Displays keyboard errors when set to Report. The default is Report.
Auto Power On Allows auto power-on. The default is Disabled.
Remote Wake Up Allows remote Wake on LAN. The default is Off.
AC Power Recovery Enables AC power recovery to occur. The default is Last.
Fast Boot Turns the fast boot option on and off. The default is Off.
Suspend Mode Displays the suspend state used by the computer. The default is S3.
System Event Log Displays the system event log when <Enter> is pressed.
Asset Tag Displays asset tag information.
Option Function
CPU Speed Sets the CPU speed. The default is Normal.
Bus Speed Displays the bus speed.
Processor ID Displays processor ID.
Clock Speed Displays clock speed.
Cache Size Displays cache size.
Option Function
Sound Turns the integrated sound off and on. The default is On.
Mouse Port Turns the mouse port off and on. The default is On.
USB Emulation Turns USB emulation off and on. The default is On.
USB Controller Turns the USB controller off and on. The default is On.
Serial Port 1 Sets serial port options and turns the port off and on. The default is Auto.
Parallel Port Displays parallel port settings when <Enter> is pressed. The default mode is PS/2 and the I/O address default is 378h.
IDE Drive Interface Sets the IDE drive interface options. The default is Auto.
Diskette Interface Sets floppy drive interface options. The default is Auto.
PC Speaker Turns the PC speaker off and on. The default is On.
Primary Video Controller Sets the primary video controller. The default is AGP.