Dell Dimension 4550 - Manual (Page 27)

Setting Up and Using Your Computer 27
2 On the Where are the files and settings? screen, select the method you
chose for transferring your settings and files, and then click Next.
The wizard reads the collected files and settings and applies them to
your new computer.
When all of the settings and files have been applied, the Finished
screen appears.
3 Click Finished and restart the new computer.
Setting Up a Home and Office Network
Connecting to a Network Adapter
Before you connect your computer to a network, it must have a network
adapter installed and a network cable connected to it.
To connect a network cable:
1 Connect the network cable to the network adapter connector on the
back of your computer.
HINT: Insert the cable
until it clicks into place,
and then gently pull it to
ensure that it is secure.
2 Connect the other end of the network cable to a network connection
device, such as a network wall jack.
HINT: Do not use a
network cable with a
telephone wall jack. network adapter
connector on
computer
network cable
network wall
jack