Dell 2145cn Multifunction Color Laser Printer - Manual (Page 30)

30 | Loading originals and print media
SETTING THE PAPER SIZE AND TYPE
After loading paper in the paper tray, you need to set the paper size and
type using the control panel buttons. These settings will apply to Copy and
Fax modes. For printing from your computer, you need to select the paper
size and type in the application program you use on your PC.
1. Press Menu (
) until System Setup appears on the bottom line of the
display and press OK.
2. Press the left/right arrow until Paper Setup appears and press OK.
3. Press OK when Paper Size appears.
4. Press the left/right arrow until the paper tray you want appears and
press OK.
5. Press the left/right arrow until the paper size you are using appears and
press OK.
6. Press Back ( ) to return to the upper level.
7. Press the left/right arrow until Paper Type appears and press OK.
8. Press the left/right arrow until the paper type you are using appears and
press OK.
9. Press Stop/Clear ( ) to return to Ready mode.
If you want to use special sized paper such as a billing paper, select
Custom in the Paper tab in the printer propeties. See Software
section.