Removing the computer cover – Dell Dimension 4100 User Manual
Page 42
42
Adding Parts
w
w
w
.d
e
ll
.co
m
|
s
u
p
p
o
rt
.d
e
ll.c
o
m
Removing the Computer Cover
CAUTION:
Before you begin any of the procedures in this section,
follow the safety instructions on page 7.
NOTICE:
To disconnect a network cable, first unplug the cable from your
computer and then unplug it from the network jack.
1
Turn off the computer and devices, and disconnect them from their
electrical outlets.
2
Briefly press the power button.
Pressing the power button when the computer is not connected to an
electrical outlet discharges residual electricity and can help prevent
system board damage.
3
Lay the computer on its right side, with the foot off the edge of the
work surface.
4
Loosen the thumbscrew.
CAUTION:
To prevent cuts, keep your hands clear of the metal
edges on the computer as you slide back the cover.
thumbscrew
latches (2)
foot
front of
computer