Safety instructions – Dell Dimension 4100 User Manual

Page 7

Advertising
background image

Safety Instr uctions

7

Safety Instructions

Use the following safety guidelines to protect yourself and your computer.
For comfort and efficiency, observe the ergonomic guidelines provided in
the Tell Me How help file.

When Using Your Computer

CAUTION:

Do not operate your computer with any cover(s)

(including the computer cover, filler brackets, front-panel inserts,

and so on) removed.

To help avoid damaging your computer, be sure that the voltage

selection switch is set to match the AC power available at your

location:
– 115 V/60 Hz in most of North and South America and some Far

Eastern countries such as South Korea and Taiwan

– 100 V/50 Hz in eastern Japan and 100 V/60 Hz in western Japan
– 230 V/50 Hz in most of Europe, the Middle East, and the Far East

Also be sure that your monitor and attached devices are electrically

rated to operate with the AC power available in your location.

To help avoid possible damage to the system board, wait 5 seconds

after turning off the computer before disconnecting or connecting a

non-USB device from the computer.

To help prevent electric shock, plug the computer and device power

cables into properly grounded power sources. These cables are

equipped with 3-prong plugs to help ensure proper grounding. Do not

use adapter plugs or remove the grounding prong from a cable. If you

must use an extension cable, use a 3-wire cable with properly grounded

plugs.

Advertising