Dell Precision M4300 (Mid 2007) - Manual (Page 126)

124
Adding and Replacing Parts
NOTE: If you ordered an FCM card with your computer, the card is already installed
.
1 Follow the procedures in "Before You Begin" on page 107.
2 Remove the hinge cover (see "Hinge Cover" on page 112).
3 Remove the keyboard (see "Keyboard" on page 113).
4 Ground yourself by touching one of the metal connectors on the back of the computer.
NOTE:
If you leave the area, ground yourself again when you return to the computer.
5 Slide the antenna cables out of the protective sleeve and away from the top of the FCM card.
6 Release the card by pushing the metal securing brackets away from the card until the card pops up
slightly.
7 Lift the card out of its connector.
1 FCM card 2 antennae cables (2) 3 metal securing brackets (2)
1
3
2