Dell Precision M4300 (Mid 2007) - Manual (Page 53)

Setting Up and Using Networks
51
Setting Up and Using Networks
Connecting a Network or Broadband Modem Cable
Before you connect your computer to a network, the computer must have a network adapter
installed and a network cable connected to it.
1 Connect the network cable to the network adapter connector on the back of your computer.
NOTE:
Insert the cable connector until it clicks into place, and then gently pull the cable to ensure that it
is securely attached.
2 Connect the other end of the network cable to a network connection device or a network wall
connector.
NOTE:
Do not use a network cable with a telephone wall connector.
Setting Up a Network in Microsoft® Windows® XP
1 Click Start→ All Programs→ Accessories→ Communications→ Network Setup Wizard→ Next→
Checklist for creating a network.
NOTE:
Selecting the connection method labeled This computer connects directly to the Internet
enables the integrated firewall provided with Windows XP Service Pack 2 (SP2).
2 Complete the checklist.
3 Return to the Network Setup Wizard and follow the instructions in the wizard.