Setting up a network in microsoft windows vista, Wireless local area network (wlan) – Dell Precision M4300 (Mid 2007) User Manual
Page 54
52
Setting Up and Using Networks
Setting Up a Network in Microsoft Windows Vista®
1 Click the Windows Vista Start button
→ Connect To→ Set up a connection or network.
2 Select an option under Choose a connection option.
3 Click Next, and then follow the instructions in the wizard.
Wireless Local Area Network (WLAN)
A WLAN is a series of interconnected computers that communicate with each other over the air waves
rather than through a network cable connected to each computer. In a WLAN, a radio communications
device called an access point or wireless router connects network computers and provides Internet, or
network, access. The access point or wireless router and the wireless network card in the computer
communicate by broadcasting data from their antennas over the air waves.
What You Need to Establish a WLAN Connection
Before you can set up a WLAN, you need:
•
High-speed (broadband) Internet access (such as cable or DSL)
•
A broadband modem that is connected and working
•
A wireless router or access point
•
A wireless network card for each computer that you want to connect to your WLAN
•
A network cable with the network (RJ-45) connector
Checking Your Wireless Network Card
Depending on what you selected when you purchased your computer, the computer has a variety of
configurations. To confirm that your computer has a wireless network card and to determine the type of
card, use one of the following:
•
The Start button and the Connect To option
•
Your original computer invoice
Start Button and Connect To Option
In Microsoft Windows XP, click Start
→ Connect To→ Show all connections.
In Microsoft Windows Vista, click
→ Connect To→ View network computers and devices.
If Wireless Network Connection does not appear under LAN or High-Speed Internet, you may not have a
wireless network card.
If Wireless Network Connection appears, you have a wireless network card. To view detailed information
about the wireless network card:
1 Right-click Wireless Network Connection.
2 Click Properties.