Pc card or expresscard problems, Power problems – Dell Precision M4300 (Mid 2007) User Manual

Page 89

Advertising
background image

Troubleshooting

87

network connector on the back of the computer and the network connector.

C

HECK

THE

NETWORK

LIGHTS

ON

THE

NETWORK

CONNECTOR

No light indicates that no network

communication exists. Replace the network cable.

P

LUG

THE

A / C

POWER

ADAPTER

INTO

THE

COMPUTER

If batter power only, the QuickSet utility can disable the

onboard network card to save battery life. For more information on the QuickSet utility, see "Dell™ QuickSet" on
page 129.

C

HECK

YOUR

NETWORK

SETTINGS

Contact your network administrator or the person who set up your network

to verify that your network settings are correct and that the tnetwork is functioning.

For more information on the different types of networks, see "Setting Up and Using Networks" on
page 51.

PC Card or ExpressCard Problems

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions in the Product

Information Guide.

C

HECK

THE

CARD

Ensure that the card is properly inserted into the connector.

E

NSURE

THAT

THE

CARD

IS

RECOGNIZED

BY

W

INDOWS

Double-click the Safely Remove Hardware icon in the

Windows taskbar. Ensure that the card is listed.

I

F

YOU

HAVE

PROBLEMS

WITH

A

D

ELL

-

PROVIDED

C

ARD

Contact Dell (see

"Contacting Dell" on page 142

).

I

F

YOU

HAVE

PROBLEMS

WITH

A

C

ARD

NOT

PROVIDED

BY

D

ELL

Contact the PC Card manufacturer.

Power Problems

Fill out the Diagnostics Checklist (see "Diagnostics Checklist" on page 143) as you complete these
checks.

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions in the Product

Information Guide.

C

HECK

THE

POWER

LIGHT

When the power light is lit or blinking, the computer has power. If the power light is

blinking, the computer is in standby mode—press the power button to exit standby mode. If the light is off, press the
power button to turn on the computer.

C

HARGE

THE

BATTERY

The battery charge may be depleted.

1 Reinstall the battery.
2 Use the AC adapter to connect the computer to an electrical outlet.
3 Turn on the computer.

NOTE:

Battery operating time (the time the battery can hold a charge) decreases over time. Depending on how

often the battery is used and the conditions under which it is used, you may need to purchase a new battery during
the life of your computer.

C

HECK

THE

BATTERY

STATUS

LIGHT

If the battery status light flashes orange or is a steady orange the battery

charge is low or depleted. Connect the computer to an electrical outlet.

Advertising