Dell Latitude D500 - Manual (Page 56)

Removing a Battery
For more information about removing the second battery, see " Using the Module Bay ."
CAUTION: Before performing these procedures, turn off the computer, disconnect it from the electrical
outlet, and disconnect the modem from the telephone wall jack.
NOTICE: If you choose to replace the battery with the computer in standby mode , you have up to 90 seconds to
complete the battery replacement before the computer shuts down and loses any unsaved data.
1. Ensure that the computer is turned off, disconnected from an electrical outlet, and disconnected from the telephone
wall jack.
2. If the computer is connected to a docking device (docked), undock it. See the documentation that came with your
docking device for instructions.
3. Slide and hold the battery-bay latch release on the bottom of the computer, and then remove the battery from the
bay.
Removing and Installing a Reserve Battery
1. Remove the battery .
2. Remove the reserve battery cover.