Dell Latitude D500 - Manual (Page 81)

2. Click the device you want to eject and click Stop.
3. If the computer is connected to a docking device (docked), undock it. See the documentation that came with your
docking device for instructions.
4. Use a #1 Phillips screwdriver to remove the device screw from the bottom of the computer.
1 device latch release
5. Press the device latch release so that the latch release pops out.
6. Pull the device by the latch release to remove the device from the module bay.
7. Insert the new device into the bay, push the device until you feel a click, and push the device latch release in so that it
is flush with the computer.
8. When the operating system recognizes the new device, click Close.
Using CDs or DVDs