Dell XPS M2010 (MXP061, Mid 2006) - Manual (Page 27)

Display: Dell XPS M2010 Service Manual
file:///C|/Users/santhosh_v.ASIA-PACIFIC/Desktop/Hawke/New%20folder/display.htm[2/21/2014 11:26:10 AM]
NOTE: If the system battery is drained and there is no power source, the latches will not automatically emerge, but
you can manually activate them by sliding the display latch release buttons forward.
3. Firmly close the lid so all four latches are engaged.
NOTICE: Ensure that all four latches are engaged securely before picking up the computer to move it or the keyboard
could fall and be damaged.
Adjusting the Display Panel
The display on your computer is adjustable. This allows you to find a viewing angle that is comfortable for you.
NOTE: Latches hold the back of the display to the hinge arms. These latches release when the display is opened to a
90 degree angle.
NOTICE: Do not position the display so that it blocks the DVD drive from opening completely.
Removing the LCD Panel
NOTICE: To help prevent damage to the system board, remove the main battery before working inside the computer.
1. Follow the instructions in Before Working Inside Your Computer , including removing the system battery.
2. With the computer still turned over, remove the memory module cover (see Removing the Memory Module Cover ).
3. Disconnect the cables for the speakers, suspend and solenoid function, and infrared sensor from the system board
connectors, and unhook the cables from the routing hook.
4. Disconnect the mini card antenna cables from the mini card, and unhook the cables from the routing hooks.