Replacing a system fan – Dell XPS M2010 (MXP061, Mid 2006) User Manual
Page 49
Advertising
System Fans: Dell XPS M2010 Service Manual
file:///C|/Users/santhosh_v.ASIA-PACIFIC/Desktop/Hawke/New%20folder/fans.htm[2/21/2014 11:26:20 AM]
7. Remove the fan from the frame by removing the three M2.5 x 5-mm screws.
8. Lift the fan out of the computer.
Replacing a System Fan
NOTE:
If the system board was replaced, be sure to reattach the microphone cable under the left fan before replacing
the fan.
1 microphone cable
2 microphone cable connector
3 system board connector
1. Attach the left fan to the computer frame using three M2.5 x 5-mm screws.
2. Route the left fan cable under the notch on the frame.
3. Connect the left fan cable to the system board connector (JFAN1).
Advertising