E5400 display bezel, Removing the e5400 display bezel – Dell Latitude E5500 User Manual

Page 16

Advertising
background image


 

6.

Connect the antenna cables to the appropriate optional WLAN, WPAN cards that came with your computer.

 

7.

Replace the keyboard (see

Replacing the Keyboard

).


 

8.

Replace the hinge cover (see

Replacing the Hinge Cover

).


 

9.

Close the display and turn the computer over.

 

10.

Replace the bottom of the base assembly (see

Replacing the E5400 Bottom of the Base Assembly

).


 

11.

Follow the procedures in

After Working on Your Computer

.

 

E5400 Display Bezel

 

Removing the E5400 Display Bezel

 

 

1.

Follow the instructions in

Before Working on Your Computer

.


 

2.

Remove the hinge cover (see

Removing the Hinge Cover

).


 

3.

Remove the keyboard (see

Removing the Keyboard

).


 

4.

Remove the display assembly (see

Removing the E5400 Display Assembly

).

 

5.

Starting at the middle bottom of the display panel, use your fingers to separate the bezel from the top cover, then lift the inside edges to separate the
remainder of the bezel.

1 antenna cables    

CAUTION:

Before you begin the following procedure, follow the safety instructions that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.

1 display bezel    

NOTICE:

Removal of the bezel from the top cover requires extreme care to avoid damage to the bezel.

Advertising