Dell Latitude E5500 - Manual (Page 17)

Replacing the E5400 Display Bezel
1. Starting at any corner, use your fingers to gently snap the bezel into place to secure it to the top cover.
2. Replace the display assembly (see Replacing the E5400 Display Assembly ).
3. Replace the keyboard (see Replacing the Keyboard ).
4. Replace the hinge cover (see Replacing the Hinge Cover ).
5. Close the display and turn the computer over.
6. Replace the bottom of the base assembly (see Replacing the E5400 Bottom of the Base Assembly ).
7. Follow the procedures in After Working on Your Computer .
E5400 Display Hinges
Removing the E5400 Display Hinges
1. Follow the instructions in Before Working on Your Computer .
2. Remove the hinge cover (see Removing the Hinge Cover ).
3. Remove the keyboard (see Removing the Keyboard ).
4. Remove the display assembly (see Removing the E5400 Display Assembly ).
5. Remove the display bezel (see Removing the E5400 Display Bezel ).
6. Remove the four M2.5 x 5-mm screws (two per side) that secure the display hinges to the display cover.
Replacing the E5400 Display Hinges
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.
NOTE: This procedure assumes that you have completed the removal procedure first.
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.
1 hinge 2 M2.5 x 5-mm screws (4)
CAUTION: Before you begin the following procedure, follow the safety instructions that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage on www.dell.com at: www.dell.com/regulatory_compliance.