Dell Latitude E5500 - Manual (Page 22)

6. Carefully remove the display cable by moving it away from the metal and plastic cable guides.
7. Turn the computer over and remove the antenna cables by moving them out of the cable guides on the bottom of the computer.
8. Slide the antenna cables through the hole in the palm rest.
9. Remove the antenna cables from the cable guides on the top of the computer.
10. Remove the two M2.5 x 8-mm screws on the top of the computer that secure the metal hinges.
11. Remove the two M2.5 x 8-mm screws that secure the hinges located on the bottom of the computer.
12. Lift the display and hinge assembly out of the computer.
Replacing the E5500 Display Assembly
1 display cable 2 antenna cables
1 M2.5 x 8-mm bottom screws (2)
1 display cable connector 2 M2.5 x 8-mm screws (2)
3 display assembly 4 antenna cables (2)