Dell ST2010B Flat Panel Monitor User Manual
Page 13
1. Press
to launch the OSD menu and display the main menu.
Main Menu for Analog (VGA) Input
or
Main Menu for HDMI Input
2.
Press the
or
button to move between the setting options. As you move from one icon to another, the option name is highlighted. See the
following table for a complete list of all the options available for the monitor.
3.
Press the
button once to activate the highlighted option.
4.
Press
and
button to select the desired parameter.
5. Press the
button to enter the slide bar and then use the
or
button, according to the indicators on the menu, to make your changes.
6.
Select the
option to return to the main menu or
the OSD menu.
`
NOTE:
AUTO ADJUST is only available when you use the analog (VGA) connector.
Icon
Menu and
Description