Dell ST2010B Flat Panel Monitor - Manual (Page 18)

Menu Timer OSD Hold Time: Sets the length of time the OSD will remain active after the last time you pressed a button.
Use the and button to adjust the slider in 5 second increments, from 5 to 60 seconds.
Menu Lock Controls user access to adjustments. When 'Lock' is selected, no user adjustments are allowed. All buttons are locked except the
menu button.
NOTE: When the OSD is locked, pressing the menu button takes the user directly to the OSD settings menu, with OSD Lock
selected. Select "Unlock" to unlock and allow user access to all applicable settings.
DDC/CI DDC/CI (Display Data Channel/Command Interface) allows your monitor parameters (brightness, color balance etc) to be
adjustable via software on your monitor. You can disable this feature by selecting "Disable".
Enable this feature for best user experience and optimum performance of your monitor.
LCD Conditioning Helps reduce minor cases of image retention. Depending on the degree of image retention, the program may take some time to
run. You can enable this feature by selecting "Enable".
Factory Reset Reset all OSD settings to the factory preset values.
Back
Press to go back to the main menu.
Personalize There are two shortcut keys on the front panel. Select one control menu for each shortcut key to allow direct access.