Dell ST2010B Flat Panel Monitor - Manual (Page 24)

Back to Contents Page
Setting Up the Monitor
Dell™ ST2010B Flat Panel Monitor User's Guide
Attaching the Base
Connecting the Monitor
Attaching the Soundbar (optional)
Removing the Stand
Attaching the Base
Connecting Your Monitor
Connecting the blue VGA cable
NOTE: The base is detached when the monitor is shipped from the factory.
After placing the monitor panel on soft cloth or cushion, complete the following steps to attach the base.
1. Place the monitor on a stable flat table.
2. Fit the groove on the base onto the riser of the monitor.
3. Push the hook to lock the stand base.
CAUTION: Before you begin any of the procedures in this section, follow the Safety Instructions .
CAUTION: The Graphics are used for the purpose of illustration only. Appearance of the computer may vary.