Dell ST2010B Flat Panel Monitor - Manual (Page 5)

*[ST2010B] color gamut (typical) is based on CIE1976 (83%) and CIE1931 (72%) test standards.
Screen dimensions 20 inches (20-inch viewable image size)
Preset display area: 442.8 mm (W) X 249.1 mm (H)
Horizontal 442.8 mm (17.43 inches)
Vertical 249.1 mm (9.81 inches)
Pixel pitch 0.2768(H) X 0.2768(W)
Viewing angle 160° (vertical) typical, 160° (horizontal) typical
Luminance output 250 cd/m²(typical)
Contrast ratio 1000 to 1 (typical)
Faceplate coating Anti-Glare
Backlight 2-CCFL edgelight system
Response Time 5ms panel typical
Color depth 16.7 million colors
Color Gamut 83%*
Resolution Specifications
Supported Video Modes
Horizontal scan range 30 kHz to 83 kHz (automatic)
Vertical scan range 56 Hz to 76 Hz (automatic)
Maximum preset resolution 1600x900 at 60 Hz
Video display capabilities (HDMI
playback)
480p, 576p, 720p, 1080p, 480i, 576i, 1080i.
Preset Display Modes
Display Mode Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity
(Horizontal/Vertical)
VESA, 720 x 400 31.5 70.0 28.3 -/+
VESA, 640 x 480 31.5 60.0 25.2 -/-
VESA, 640 x 480 37.5 75.0 31.5 -/-
VESA, 800 x 600 37.9 60.7 40.0 +/+
VESA, 800 x 600 46.9 75.0 49.5 +/+
VESA, 1024 x 768 48.4 60.0 65.0 -/-
VESA, 1024 x 768 60.0 75.0 78.8 +/+
VESA, 1152 x 864 67.5 75.0 108.0 +/+
VESA, 1280 x 1024 64.0 60.0 108.0 +/+
VESA, 1280 x 1024 80.0 75.0 135.0 +/+
VESA, 1600 x 900 55.5 60.0 97.75 +/-
Electrical Specifications
Video input signals
Analog RGB, 0.707 Volts +/- 5%, positive polarity at 75 ohm input impedance
HDMI, 600mV for each differential line, 100 ohm input impedance per differential pair
Synchronization input signals
Separate horizontal and vertical synchronizations, polarity-free TTL level, SOG (Composite SYNC on
green)
AC input voltage/frequency/current 100 to 240 VAC/50 or 60 Hz + 3 Hz/1.5A (Max.)
Inrush current
120 V: 30 A (Max.)
240 V: 60 A (Max.)
Physical Characteristics