Canon IMAGE FORMULA DR-3010C - Manual (Page 11)

Chapter 1 Before Using the Scanner
- 6 -
1
This section describes the name and function of each part. Make sure to read
this section and familiarize yourself with the parts of the scanner before using
the scanner.
„ Front View/Right-Side View
„ Front View (With the Document Feed Tray and Eject Tray Open)
„ Operation Panel
„ Back View
3. Names and Functions of Parts
Document Feeder
Load the Document.
(See p.12.)
Power Indicator
This indicator lights blue
when the scanner is
turned ON.
Document Feed Tray
Attach before placing
documents.
Document Guides
Adjust these guides to fit the
width of the document. (See
p.13.)
Front Unit
Open when clearing paper jams
and cleaning the scanner. (See
p.23 and p.28.)
Document Eject Area
Scanned documents are
output here.
Extension Tray
Pull this tray out if the
document hangs over the
edge of the document feeder.
Extension Tray
Pull this tray out if the document hangs
over the edge of the document eject
tray.
Document Eject Tray
Open this tray when you
want to stack output
documents.
OPEN Button
Use to open the front unit.
Stop Key
Stops scanning.
Plus Key
Increases the job number on the display
panel.
Display Panel
Displays the job numbers or the error
codes.
Minus Key
Reduces the job number to
scan on the display panel.
Start Key
Starts the job number to scan on the
display panel.
Error Codes Displayed:
: Displayed if the front unit is open.
: Displayed if a paper jam is detected.
: Displayed if a double feed is detected while scanning.
: Displayed if another type of error occurs.
For information resolving error codes, see "An Error Code Is Displayed on the
Display Panel," on p.39.
Power Switch
This switch is used to turn the scanner
ON and OFF. If you set the switch to
‘AUTO’, the scanner is linked to be
automatically turned ON/OFF in
accordance with the power of the
computer.
Theft Prevention Hole (Kensington)
Attach a key chain, etc. here to prevent
the scanner from being stolen.
USB Connector
Connect a USB cable that supports
Hi-Speed USB 2.0 to this
connector.
Power Connector
Connect the supplied AC adapter to
this connector.