Canon IMAGE FORMULA DR-3010C - Manual (Page 27)

Chapter 2 Basic Operation
- 22 -
2
Saving the Text Data of Documents as Search Keywords
You can set the scanning conditions to convert the text information of a document
into text data when creating a PDF file, to be used when searching the text on a
computer.
Select [OCR Settings] from the [Options] menu in CapturePerfect 3.0
→ select the
[Enable] check box → select the language to apply OCR from the Language for
OCR drop-down list → click [OK].
For more information on setting the scanning conditions, see the CapturePerfect3.0
Operation Guide .
Specifying Security Settings for PDF Files
You can specify security settings to restrict the viewing, printing, and editing of
PDF files created with CapturePerfect 3.0.
For more information on specifying security settings, see the
CapturePerfect3.0
Operation Guide .
This section provides examples of settings when scanning with the DR-3010C.
Refer to these examples when specifying ISIS/TWAIN driver settings. For
descriptions of particular setting items, see Chapter 4, "ISIS/TWAIN Driver
Settings," in the User Manual.
Scanning Both Sides of Pages
•
To scan both sides of pages
Select [Duplex] from the Scanning Side drop-down list.
Scanning Non-Standard Size Documents
•
To scan irregular size documents
If irregular size documents are scanned with a standard size selected for the
Page Size setting, black areas may appear around the scanned document
image. To scan irregular size documents, select [Auto-detection] from the Page
Size drop-down list. The page size is then detected automatically.
•
To register an irregular page size for scanning documents
An irregular document size not already registered as a page size selection can
be saved as a custom page size.
(See Chapter 4, "ISIS/TWAIN Driver Settings," in the User Manual.)
•
To scan only part of the document page
You can specify the scanning area. However, you cannot set the scan area when
[Auto-detection] is selected from the Page Size drop-down list.
(See Chapter 4, "ISIS/TWAIN Driver Settings," in the User Manual.)
Scanning Multiple Batches as One Document
•
To scan a document that has too many pages to be loaded all at once as
separate batches
Select [Automatic Feeding] from the Feeding Option dialog box. When this
option is selected, the scanner detects documents and starts scanning as they
are loaded, so continuous scanning is possible by loading the document
batches repeatedly.
If you select [Panel-Feeding] from the Feeding Option dialog box, scanning
does not start until you press the Scan button. This is useful if you want to
straighten documents after you have placed them in the scanner.
5. Practical Examples