Canon IMAGE FORMULA DR-3010C - Manual (Page 40)

Chapter 3 Appendix
- 35 -
After replacing the feed rollers, open the counter settings dialog box and reset
the counter.
1
From the Windows task bar, click [Start] → [Control Panel].
2
If the Control Panel is displayed with the Category View, click [Printers and
Other Hardware] in the working field
→ click [Scanners and Cameras].
If the Control Panel is displayed with the Classic View, double-click
[Scanners and Cameras].
Control Panel (Category View) Printers and Other Hardware
Control Panel (Classic View)
3
Right-click [CANON DR-3010C USB] → click [Properties].
4
Click the [Maintenance] tab → [Reset].
5
Confirm that the counter for the selected roller is set to 0 → click [OK].
Resetting the Counter