Canon IMAGE FORMULA DR-3010C - Manual (Page 24)

Chapter 2 Basic Operation
- 19 -
The Scan Panel is an application that is installed with the ISIS/TWAIN driver. It
is displayed in the system tray when the DR-3010C driver is started.
If <Feeding Option> in the [Others] tab in the Properties for Canon DR-3010C
dialog box is set to ‘Panel-Feeding’ or ‘Automatic Feeding’, the Scan Panel will
appear when you start scanning.
Scan Panel Functions
The Scan Panel has the following functions.
cStart button
If <Feeding Option> in the [Others] tab in the Properties for Canon DR-3010C
dialog box is set to ‘Panel-Feeding’, clicking this button starts scanning.
dStop button
Stops scanning.
eBatch Separation button
After selecting [Panel] as the batch separation setting on the [Others] tab, if you
enable batch separation from the application and start scanning, this button
becomes active when scanning of the current document completes, and
scanning stops. When clicked, this button depresses and remains depressed
while scanning with batch separation continues, until scanning of the current
document completes, and scanning stops. The button then returns to normal.
This section describes examples of settings that can be specified when scanning
with the DR-3010C. For more information, see Chapter 4, "ISIS/TWAIN Driver
Settings," in the User Manual, or the Help.
Enhancing the Text of a Document
You can set the scanning conditions to enhance the text of documents with dark
backgrounds or documents with a light uniform background and low-contrast text.
Click the [Basic] tab in the Properties for Canon DR-3010C dialog box
→ select
[Advanced Text Enhancement] or [Advanced Text Enhancement II] from the Mode
drop-down list
→ click [OK].
For more information on setting the scanning conditions, see Chapter 4, "ISIS/
TWAIN Driver Settings," in the User Manual.
Scanning Documents That Include Both Color and Black-and-White Pages
You can set the scanning conditions to detect whether the document to scan is in
color or black and white, and save it as a color image or black and white image
accordingly.
Click the [Basic] tab in the Properties for Canon DR-3010C dialog box
→ select
[Auto Color Detection] from the Mode drop-down list → click [OK].
For more information on setting the scanning conditions, see Chapter 4, "ISIS/
TWAIN Driver Settings," in the User Manual.
Using the Scan Panel
d
c
e
Special Scanning