Sony CDP-C201 - Manual (Page 15)

Maintenance Specifications
Cleaning the cabinet
Clean the cabinet, panel and controls with a soft cloth
lightly moistened with mild detergent solution. Do not use
any type of abrasive pad. scouring powder or solvent such
as alcohol or benzine.
Cleaning discs
Before playing, clean the disc with the cleaning cloth.
Wipe the disc from the center out.
Do not use solvents such as benzine, thinner,
commercially available cleaners or anti-static spray
intended for analog discs.
After playing, store the disc in its case.
System
Laser
Laser output
Frequency response
Signal to noise ratio
Dynamic range
Harmonic distortion
Channel separation
Wow and flutter
Outputs
General
Power requirements
Power consumption
Dimensions
Weight
Compact disc digital audio system
Semiconductor laser (X=780 nm)
Emission duration: continuous
Max. 44.6 )xW*
* This output is the value measured
at a distance of about 200 mm
from the objective lens surface on
the Optical Pick-up Block.
2 Hz-20 kHz °
More than 93 dB
More than 90 dB
Less than 0.05% (1 kHz)
More than 90 dB (1 kHz)
Below measurable limit
LINE OUT (phono jacks)
Output level 2 V (at 50 kilohms)
Load impedance over 10 kilohms
PHONES (stereo phone jack)
(CDP-C305/C205 only)
Output level 0-10 mW (variable)
(at 32 ohms)
Model for USA
120 V AC, 60 Hz
Model for Australia (CDP-C305 only)
240 V AC, 50/60 Hz
11 W
CDP-C305/C205/C201
Approx. 430x110x385 mm (w/h/d)
(17 X
43/3 X15V4 inches)
CDP-C301M
Approx. 355x110x385 mm (w/h/d)
( 14x43/3x15’/« inches) not
including projecting parts and
controls
CDP-C305/C205/C201
Approx. 4.9 kg (10 lbs 13 oz), net
CDP-C301M
Approx. 5.0 kg (11 lbs), net
Supplied accessories
Audio signal connecting cord
(phono plu.g X 2 <-» phono plug X 2) (1)
Remote commander (1) (CDP-C305 only)
R6 (size AA) batteries (2) (CDP-C305 only)
Operating Manual (t)
Design and specifications subject to change without notice.
15