Sony CDP-C201 - Manual (Page 9)

Information Display Selecting a Desired Disc
If you press press ^ or the compartment itself to close
the compartment, the total number of selections and the
total playing time of the disc to be played are displayed
for a few seconds.
Each time you press TIME during play, the display
changes to give you the following information.
[
a ] Elapsed time in a selection (automatically displayed
when play begins)
[ b 1 Remaining time in a selection
“ — i n d i c a t i o n will appear in the display window
instead of the actual time if a selection numbered 21
or higher is selected.
[C] Remaining time of the disc
By using the DISC 1 to 5 buttons or the DISC SKIP button
during play, you can locate the beginning of any disc.
Notes
• Total remaining time is only available during continuous mode. If
will not be displayed by pressing the TIME button during
program or shuffle mode.
• Total remaining time will be displayed, if time fade is set during
program or shuffle.
To select a particular disc
(for CDP-C305 only) [II
Press the corresponding
DISC 1 to 5 button.
To move to the disc tray next
to the current one Press DISC SKIP button.
Locating a Particular Seiection
Locating a selection in sequence (Automatic Music
Sensor)
You can locate the beginning of a selection on the disc
being played.
To locate the beginning of the
selection being played Press ◄◄ once.
To locate the beginning of the
next selection Press ►► once.
Continue to press until the selection you want is located.
Note (for CDP-C30S only)
You can operate this function on the remote commander. Press
l/l
Locating a Particular Point in a
Selection
Locating a point in sequence (Manual Search)
You can locate a particular point in a selection during play
by monitoring the high-speed sound.
To go back at high speed Keep ◄◄ pressed.
To go ahead at high speed Keep ►► pressed.
Release the button when you reach the point in the
selection you want.
Note (for CDP-C305 only)
You can operate this function on the remote commander. Keep
pressed.
To locate at a higher speed
Press ◄◄ or ►► ►W in the pause mode. Search
speed will increase three times, but there will be no
sound. Find the desired point by watching the numbers in
the display.