Sony DHC-MD500 User Manual
Mini hi-fi component system
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
soNTi?:
3-864-057-11(1
Mini Hi-Fi
Component
System
Operating Instructions
Owner's Record
The model and serial numbers arc located on the rear panel. Record the serial
number in the space provided below. Refer to them whenever you call upon your
Sony dealer regarding this product.
Model No.
Serial No.
DIGITAL AUDIO
DHC-MD500
DHC-RX707
©1998 by Sony Corporation
Advertising
Table of contents
Document Outline
- soNTi?:
- ©1998 by Sony Corporation
- To prevent fire or shock hazard, do not expose the unit to rain or moisture.
- Table of Contents
- Step 1: Hooking up the system
- Step 2: Setting the time
- 1 2,4 3,5
- Step 3: Presetting radio stations
- Connecting optional -M/ components
- Playing a CD
- Recording a CD
- Listening to the radio
- Recording from the radio
- Playing a tape
- Recording from a tape
- Using the CD display
- Playing the CD tracks repeatedly
- Playing the CD tracks in random order
- Programming the CD tracks
- Playing CDs without interruption
- Recording on a tape Irnanually
- Recording a CD by .specifying track order
- Looping part of a CD
- Flashing part of a CD
- Adjusting the sound
- Selecting the audio emphasis
- Selecting the surround effect
- Using the Radio Data System (RDS)
- Singing along: Karaoke
- Falling asleep to №usic
- Waking up to music
- 4,5,6,7,8
- 1 Prepare the music source you want to play.
- 2 Adjust the volume.
- 3 Press CLOCK/TIMER SET.
- 4 Turn jog dial to select DAILY 1 or 2, then press ENTER/ NEXT.
- 5 Set the time to start playback.
- 6 Set the time to stop playback following the above procedure.
- 7 Turn jog dial until the music source you want appears.
- 8 Press ENTER/NEXT.
- 9 Turn off the power.
- To cancel the timer operation
- Timer-recording radio programs
- 1 Tune in the preset radio station (see "Listening to the radio").
- 2 Press CLOCK/TIMER SET.
- 3 Turn jog dial to select "REC", then press ENTER/NEXT.
- Set the time to stop recording following the above procedure.
- 6 Insert a recordable tape.
- 7 Turn off the power.
- To check the setting
- To cancel the timer operation
- Precautions
- Troubleshooting
- The sound from the connected source is distorted.
- The timer does not function.
- The remote does not function.
- There is acoustic feedback.
- Sound comes from one channel or unbalanced left and right volume.
- Sound lacks bass.
- The CD tray does not close.
- If other troubles not described above occur, reset the system as follows;
- Specifications
- Index