Sony DHC-MD500 - Manual (Page 14)

Recording a CD
— CD Synchro Recording
The CD SYNC button lets you record from a
CD to a tape easily. You can use TYPE I
(normal) or TYPE 11 (C
1 O 2 ) tapes. The
recording level is adjusted automatically.
1 /(!)
(Power)
5 DISC SKIP/ •>
EX-CHANGE
Press â and place a CD.
Then press again to close the disc tray.
If the indicator for the tray you want to
record is not lit green, press DISC SKIP /
EX-CHANGE repeatedly so that it lights
green.
With the label
side up. When
you play a single
CD, place it on
the inner circle
of the tray.
J Press CD SYNC.
Deck B stands by for recording and the
CD player stands by for playback. The
indicator on TAPE B ► (for front side)
lights up.
4
Press DIRECTION repeatedly to
select to record on one side.
Select (or RELAY) to record on
both sides.
5
Press I I PAUSE.
Recording starts.
1
Press = and insert a blank tape into
deck B.
With the side
you want to
record facing
forward
To stop recording
Press ■.
Tips
• If you want to record from the reverse side, press
TAPE B to light its indicator after pressing CD
SYNC.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR so
that "DOLBY NR" appears after pressing CD
SYNC.
Note
You cannot listen to other sources while recording.
14