1 press clock / timer set, 2 turn the jog dial to set the hour, 3 press enter/next – Sony DHC-MD500 User Manual
Page 7: 5 press enter/next, Step 3: presetting radio stations, Presetting radio stations
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1
Press CLOCK / TIMER SET.
The hour indication flashes.
2
Turn the jog dial to set the hour.
3
Press ENTER/NEXT.
The minute indication flashes.
4
Turn the jog dial to set the minute.
5
Press ENTER/NEXT.
The clock starts working.
* •
Tips
• If you've made a mistake, start over from step 1.
• Setting the time deactivates the demo mode.
If you want to display the demo mode, press
DISPLAY/DEMO when the power is off.
Note
The previous explanation shows you how to set the
time while the power is off. To change the time
while the power is on, do the following:
1 Press CLOCK/TIMER SET.
2 Turn the jog dial to select SET CLOCK.
3 Press ENTER/NEXT.
4 Perform steps 2 through 5 above.
Step 3: Presetting
radio stations
You can preset the following number of
stations:
- 2 band model: 20 for FM, 10 for AM.
- 3 band model: 20 for FM, 10 for MW, and
10 for SW (or LW, depending on the model
you purchased).
- 4 band model: 20 for FM, 10 for MW, 10 for
LW, and 5 for UKV.
continued