Searching for the beginning of a track (ams*), Notes, Tips – Sony DHC-MD500 User Manual

Page 18

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Playing a tape (continued)

1

Press = and insert a recorded tape
in deck A or B.

With the side
you want to
play facing
forward

• Pressing TAPE A (or TAPE B) ► or when the

power is off automatically turns the power on and
starts tape playback if there is a tape in the deck
(One Touch Play).

• You can switch from another source to the tape

deck just by pressing TAPE A (or TAPE B) or

(Automatic Source Selection).

• When you want to reduce the hiss noise in low-

level high-frequency signals, press DOLBY NR so
that "DOLBY NR" appears.

• When dubbing tapes originally recorded with

Dolby NR, the dubbed tape is automatically
played with Dolby NR.

Tips

Press DIRECTION repeatedly to
select to play one side. Select

to play both sides.

To play both decks in succession, select
RELAY (relay play).“

3

Press TAPE A (or TAPE B) ►
(DECK A (or DECK B) ► on the
remote).
Press TAPE A (or TAPE B) to play
the reverse side. (Press DECK A (or
DECK B) ►- again on the remote to play
the reverse side.) The tape starts playing.

* The deck stops automatically after
repeating the sequence five times.
** Relay play always follows the following
sequence:
Deck A (front side), Deck A (reverse side).
Deck B (front side). Deck B (reverse side).

To

Stop play

Pause

Fast-forward

Rewind

Do this

Press

I

Press II PAUSE. Press
again to resume play.

Press •

Press ■■

Remove the cassette Press i

Searching for the beginning of a
track (AMS*)

During playback, turn the jog dial the same
direction as the or ► indicator to go
forward. Turn the opposite direction to go
back. (Or press or on the remote.)

The search direction, + (forward) or - (back),
and number of songs being skipped (1~9)
appear in the display.

Example: searching forward 2 songs

* AMS (Automatic Music Sensor)

Notes

The AMS function may not operate correctly under

the following circumstances:

- When the unrecorded space between songs is less

than 4 seconds long.

- If completely different information is recorded on

the left and right channels.

- When there are continuous sections of extremely

low level or low frequency sound (like those of a
baritone sax).

- When the unit is placed near a television. (In this

case, we recommend moving the unit farther away
from the television or turning off the television.)

Adjust the volume Turn VOLUME (or press

VOL - on the remote).

18

Advertising