Connecting to the amplifier q – Sony PS-J10 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
□
P S - J 1 0
□
Connecting to the
Amplifier Q
Connect the red plug to the right-
channel PHONO IN jack (R), and
the white plug to the left-channel
PHONO IN jack (L) on the
amplifier.
If your amplifier does not have
PHONO IN jacks, connect the plugs
to the AUX IN or LINE IN jacks.
Set EQ ON/OFF on the bottom
panel according to the amplifier
connection as follows:
For connection to
Set EQ ON/OFF to
PHONO IN jacks
OFF
AUX IN or LINE IN ON
jacks
To remove the dust cover
(Fig. 0 )
Lift the cover until it stops, then push
upward on the bottom edge of the cover
until the cover slides off the hinges.
8
Advertising