Sony CFD-C1000 - Manual (Page 11)

Deck B Press 9 on deck 15 to start
recording (► ■ is depressed
automaticallv).
00
su
n'
O
■ o
(D
O
3
Tips
• Adjusting the volume
or the audio emphasis
(see page 28) will not
affect the recording
level.
• If the AM program
makes a whistling
sound after you've
pressed
9 in step 3,
press PLAY MODE*
MONO/STISS
(Interference Suppress
switch) repeatedly until
the noise is at a
minimum.
• When recording from
two or three CDs, the
player pauses
recording and makes a
blank between the
tracks while CDs are
being changed. When
changing of CDs is
finished, recording
resumes automatically.
• To erase a recording,
proceed as follows:
1 Insert the tape whose
recording you want
to erase into deck B.
2 Press TAPE.
3 Press 9 on deck B.
Note
Do not press ► ► or
on deck A while
recording on a tape.
Use these buttons for additional operations
POWER
To Press
stop recording ■ ± on deck B
pause recording 11 on deck B
Press the button again to
resume recording.
turn on/off the player POWER
Basic Operations 1 1